- Manufacturer: Case IH
- Model: DC93
- Tongue Type: Side-pull, Straight Tongue
- Cutting Width Ft/in [ M ]: 9 Ft 2 In [2.8]
- Cutting Height - In (mm): 1.1 To 2.7 (29 To 68) Std.; 2.3 To 4.5 (58 To 115) Opt.
- Cutter Bar Tilt Angle °: 2 To 10
- Cutter Bar Lubrication: Sealed Independent Disc Modules
- Number Of Discs: 7
- Number Of Knives Per Disc: 2
- Disc Speed Rpm: 3000
- Disc Drive Components: Shafts W/bevel Gears
- Flotation: Up & Back, Adjustable Springs
- Windrow / Swath Width - Ft-in (m): Windrow 3 To 6 (0.9 To 1.83); Swath 6 (1.83)
- Conditioner Type: Roll Or Flail
- Conditioner Drive: 4 Hb V-belt; Rolls Also Have Enclosed Gears
- Roll Length Inches [ Mm ]: 90 [2286]
- Roll Diameter - In (mm): 10.4 (264)
- Roll Speed Rpm: 647
- Roll Material Type: Rubber
- Roll Surface Pattern, Standard: Chevron Intermeshing
- Rotor Length Inches [ Mm ]: 90 [2286]
- Rotor Diameter Inches [ Mm ]: 22 [560]
- Rotor Speed - Rpm: 718 Std.; 1000 Opt.
- Number Of Flails: 90
- Flail Shape: Tapered
- Minimum Pto Power Required Hp [ Kw ]: 65 [49]
- Pto Rated Speed - Rpm: 540
- Hookup To Tractor Drawbar: Standard Pin, Tractor Drawbar Category 2
- Number Of Hydraulic Remotes: 2
- Hydraulic Relief Pressure Psi [ Bar ]: 1500 [103]
- Transport Width Ft/in [ M ]: 9 Ft 11 In [3.02]
- Transport Length - Ft-in (m): 17' 7" (5.36) W/rolls; 18' 1" (5.51) W/flail Tines; Add 2' (0.61) For Swivel
- Transport Height Ft/in [ M ]: 5 Ft 8 In [1.73]
- Ground Clearance Inches [ Mm ]: 17 [432]
- Weight W/ Roll Conditioner - Lbs (kg): 3,740 (1697)
- Tire Size: 9.5lx14l, 6pr
- Weight W/ Roll Conditioner Lbs [ Kg ]: 3740 [1697]
- Weight W/ Flail Conditioner Lbs [ Kg ]: 3690 [1674]
